The SIX SPEED is a single 12” long enclosure with six of the no-knobber (see individual descriptions above) circuit boards installed in series.  Each of the individual effects are true bypass, so an optional switchable input buffer can help push your signal through with all of the frequencies intact.  You can choose which controls you want on the outside and which to leave under the hood for “set-and-forget” operation.  These are made to order with a 4-5 week lead time.  You get to choose the effects and the order; the photo above is just for reference.  Send us an email to work out the design. $750 total - $300 deposit due with order.  *Prices include USA shipping (international will be quoted upon request)

CUSTOM PEDALS

BIG BROTHERS

Any of the no-knobber circuits listed above can be housed in a larger enclosure with external knobs for controlling the effect parameters and a snap inside for 9V battery power.  These are made to order with a 6-8 week lead time.  Send us an email for more info.  $140 including USA shipping (international will be quoted upon request).  $170 for the Moody Blue reverb.  $160 for the Black Hole chorus.  $50 deposit.

Similar to the Big Brother pedals above, the TWO in ONE pedals house two no-knobber circuits in a compact 3-5/8” x 4-5/8” enclosure with external knobs & swtiches, or a 2-1/2” x 4-5/8” enclosure with no knobs.  Both options include an internal snap for 9V battery power.  There are some great combinations that are magical in the TWO in ONE configuration.

    Green Zapper auto filter - Purple Octopus octave up:    synth-esque fun

    Orange Whip compressor - Bluebird fuzz:    warm and full cleans to searing solos

    Purple Octopus octave up - Bluebird fuzz:    classic octave fuzz sounds

    Crimson tremolo - Green Zapper auto filter:    cool modulated synth sounds

    PInkman dirty boost - Orange Whip compressor:    smooth drive sounds

    Red Brick Delay - Moody Blue reverb:    echooooo

    Almost endless possibilities!

The EIGHT SPEED is a single 18” long enclosure with eight circuits installed in series.  Each of the individual effects are true bypass, so an optional switchable input buffer can help push your signal through with all of the frequencies intact.  You can choose which controls you want on the outside and which to leave under the hood for “set-and-forget” operation.  These are made to order with a 4-5 week lead time.  You get to choose the effects and the order; the photo above is just for reference.  Send us an email to work out the design. $900 total - $350 deposit due with order.  *Prices include USA shipping (international will be quoted upon request)

Lead time is 6-8 weeks

$225 total

$20 extra for optional buffer circuit

$10 extra for Red Brick delay circuit

$20 extra for Moody Blue reverb circuit

$10 extra for Black Hole chorus or vibrato

*Prices include USA shipping (international will be quoted upon request)

Deposit on a TWOinONE with knobs:  $100.

Send an email (kevin@henrettaengineering.com) to let us know the pedal you want.

Deposit on Six Speed

    Send an email (kevin@henrettaengineering.com) to let us know the pedal you want.

Deposit on Eight Speed

    Send an email (kevin@henrettaengineering.com) to let us know the pedal you want.

Deposit on Smaller No-Knob TWOinONE:  $50.

Send an email (kevin@henrettaengineering.com) to let us know the pedal you want.

kevin@henrettaengineering.com

773.307.3107

Copyright 2023

Henretta Engineering LLC

Different sizes available depending on controls and effects required.

Pick any three of our circuits.  Number of knobs and switches customizable based on what you really need on the outside.  Base price is $350.  Toggle to flip-flop the order of any two of the three is $15.  Switchable buffer is $20.  Red Brick delay and Black Hole chorus or vibrato are $10 additional.  Moody Blue reverb is $20 additional.  $175 deposit due upon order. 6-8 week lead time.

           *Prices include USA shipping (international will be quoted upon request)

Deposit on Three in ONE

    Send an email (kevin@henrettaengineering.com) to let us know the pedal you want.

THE CONSOLE is fully customizable and uses a sloped face 20” x 11.5” enclosure to house as many as 20 effects as shown in the photos above.  All controls can be mounted externally, or some can be left under-the-hood, for a full featured hand-built multi-effect unit that takes a single 9VDC power supply. $2000 base price (some features additional) with a $1000 deposit due upon ordering.  Typical lead time is 6-8 weeks.

Some other comments on the CONSOLE:

1. 1. We always put a switchable buffer at the input to battle signal loss from all of the internal wiring and switches, if wanted.  Some of us like the treble roll-off from multiple switches.  Some don’t.
   

2. 2.Toggles can be used to flip-flop the order of some effects for added flexibility.  For the one shown in the top photo above, the yellow toggle puts the phaser either before or after the drives.  The red toggle puts the tremolo at the very beginning (for cool sounds with the envelope filter) or after the phaser.
   

3. 3.We can put a full patch bay on the back to allow jumper cables for total effect order flexibility.
   

4. 4.We’d love to put fancier digital control and MIDI capability into these units.  We are currently backed only by Kevin’s relatively shallow pockets, so such an endeavor is not feasible at this time.  Some day!
   

Deposit on THE CONSOLE    Send an email (kevin@henrettaengineering.com) to let us know the pedal you want.

9.75” x 2.6” footprint

Pick any four of our circuits.  Number of knobs and switches customizable based on what you really need on the outside.  Base price is $425.  Toggle to flip flop the order of any two of the effects is $15.  Switchable buffer is $20.  Red Brick delay and Black Hole chorus or vibrato are $10 additional.  Moody Blue reverb is $20 additional.  $200 deposit due open order.  6-8 week lead time.

           *Prices include USA shipping (international will be quoted upon request)

Deposit on FOUR in ONE

    Send an email (kevin@henrettaengineering.com) to let us know the pedal you want.

Deposit on a BIG BROTHER    Send an email (kevin@henrettaengineering.com) to let us know the pedal you want.

For both 2in1 models, jacks are located on the top side unless requested otherwise.

This is the enclosure we use for the slightly larger than the original lineup pedals (2.4” x 2.2”) - Golden Years phaser and Red Brick delay.  There is just enough room inside to fit a couple potentiometers, allowing up to two external knobs.  Choose any of the no-knobber circuits (except chorus and reverb), and let us know which controls you want on the outside.  We’ll drill a bare aluminum enclosure and slap on a label and knobs like the mock-up shown.

Buy a TWO KNOBBER  $130

Send an email (kevin@henrettaengineering.com) to let us know the pedal you want.  Price includes USA shipping.  3 week lead time.

MINI CONSOLE uses a smaller 14” x 8.5” sloped enclosure to house as many as 12 effects.  Available features are the same as the big Console described above. $1300 base price (some features additional) with a $700 deposit due upon ordering.  Typical lead time is 6-8 weeks.

Deposit on MINI CONSOLE

Send an email (kevin@henrettaengineering.com) to let us know the pedal you want.